Book Shelf / Lizard Stand
Part 2 for our middle kid’s room to match the Black Pipe frame desk we made last week. We want the decor in the room to match all around.
I stared with 2 X 12s, planing them just enough to flatten them out I also trimmed them slightly to get the nice straight edge. I cut some additional lengths of the board about 2 inches thick and glued them to the cleaned-up 2 X 12s so I could get a total dimension of 30″ X 13.5″.
The supports are made out of 10″ X 3/4″ Black pipe and flanges, except for the feet witch are 5 inches with flanges and Pipe caps.
- 2 – 2″ X 12″ X 8′ pine boards
- 8 – 10″ X 3/4″ Black Pipes
- 4 – 5″ X 3/4″ Black Pipes
- 4 – 3/4″ pipe caps
- 1″ # 12 beveled wood screws
- WATCO Dark Walnut Danish Oil Stain
- Minwax Polycrylic Protective Finish
The shelves were finished off with the WATCO Dark Walnut Danish Oil Stain and Protected with Minwax Polycrylic Protective Finish
And of course, the top shelf becomes Tangerien’s (he is a leopard Geco) new spot.
More photos in the gallery below. More Decor to come! check out next week’s post!